(Redirected from Single Edge Contact Cartridge)
Type | Slot |
---|---|
Chip form factors |
|
Contacts | 242[1] |
FSB protocol | AGTL+ |
FSB frequency | 66, 100, and (on third-party chipsets) 133 MHz |
Voltage range | 1.3 to 3.50 V |
Processors | Pentium II: 233–450 MHz Mobile casino 5 free. Celeron: 266–433 MHz Slotkets also made it possible to use some Pentium Pro CPUs for Socket 8 using the same method.)Pentium III: 450–1.133 GHz (A Slotket makes following Socket 370 CPUs usable: Celeron and Pentium III to 1,400 MHz, VIA Cyrix III: 350–733 MHz, VIA C3: 733–1,200 MHz |
Predecessor | Socket 7 |
Successor | Socket 370 |
This article is part of the CPU socket series |
Pentium II SECC form installed into Slot 1
Slot 1 refers to the physical and electrical specification for the connector used by some of Intel's microprocessors, including the Pentium Pro, Celeron, Pentium II and the Pentium III. Both single and dual processor configurations were implemented.
Intel switched back to the traditional socket interface with Socket 370 in 1999.
- 4Chipsets and officially supported CPUs[5][6]
The tables realistically afford you socket 8 slot 1 adapter more than what the slots promised you. Discover how to Understand the odds Develop winning strategies Avoid gimmicks and bad bets Manage your money effectively Gamble on the Internet Deal with the IRS Read more Growing up in a conservative small town along the Maine coast, Kevin Blackwood never anticipated visiting Sin City. Together, the wedge and body act as a vise which grips the wire rope and locks it in place.Gunnebo Johnson wedge sockets may be used with multiple sizes of wire rope.To switch from an overhaul ball application calling for a 7/8' wire rope to a block application calling for a 1' rope, it is not necessary to buy a completely new wedge socket. Socket 8 - Slot 1 Slotket Adapters. Discussion about old PC hardware. I have a 440FX board with both Slot 1 and Socket 8. There were a few like that. This one is a Supermicro P6SKE and it is a gigantic board because it has spots for all sorts of extras like Ultra SCSI (on P6SKS). The Slot 1 socket was a departure from the prior sockets which housed only the CPU chip itself and relied on the installer to affix an appropriate thermal solution to it, and optionally cache on the motherboard. Instead, the whole assembly of CPU and cooling solution were to be merged into one unit, which could be “plugged in”. Oct 17, 2017 A slot is a computer processor connection designed to make upgrading the processor much easier, where the user would only have to slide a processor into a slot. The original slot, or Slot 1 (pictured below), was first released by the Intel Corporation in 1997 as a successor to the Socket 8.
General[edit]
With the introduction of the Pentium II CPU, the need for greater access for testing had made the transition from socket to slot necessary. Previously with the Pentium Pro, Intel had combined processor and cache dies in the same Socket 8 package. These were connected by a full-speed bus, resulting in significant performance benefits. Unfortunately, this method required that the two components be bonded together early in the production process, before testing was possible. As a result, a single, tiny flaw in either die made it necessary to discard the entire assembly, causing low production yield and high cost.[2]
Intel subsequently designed a circuit board where the CPU and cache remained closely integrated, but were mounted on a printed circuit board, called a Single-Edged Contact Cartridge (SECC). The CPU and cache could be tested separately, before final assembly into a package, reducing cost and making the CPU more attractive to markets other than that of high-end servers. These cards could also be easily plugged into a Slot 1, thereby eliminating the chance for pins of a typical CPU to be bent or broken when installing in a socket.
The form factor used for Slot 1 was a 5-inch-long, 242-contact edge connector named SC242. To prevent the cartridge from being inserted the wrong way, the slot was keyed to allow installation in only one direction. The SC242 was later used for AMD's Slot A as well, and while the two slots were identical mechanically, they were electrically incompatible. To discourage Slot A users from trying to install a Slot 1 CPU, the connector was rotated 180 degrees on Slot A motherboards.
In this age of modernisation, even the previously considered “developing” nations like India have caught up with the apparently considered “developed” nations of the west—India is the hub of technological developments, but more importantly, the acceptance of such developments has had a significant impact on both society as well as its members. Below are the two online roulette strategies that work best, ultimately so you can win the most: METHOD 1 – Slow discrete winnings, with multiple accounts: This is usually the preferred method, but it involves having multiple accounts. How To Win Big On Online Roulette - Bonus Tips 1) Beginner's Luck: 2) Choose Your Table Wisely: 3) Slow and Steady Wins the Roulette Race: 4) Keep Your Winnings Separate: 5) Be An Observer. Tricks to win roulette online play. Jan 23, 2019 The best way to learn how to play and how to win at Roulette online is to start from the freeplay option that most Roulette sites offer. This way, you can get familiar with the Roulette. The thing about these roulette tips to win is that they apply whether you are in a real-life casino or just playing online. As long as you are playing on a betting site that employs a random number generator the systems may be able to help you.
1 8 Inch Socket Set
With the new Slot 1, Intel added support for symmetric multiprocessing (SMP). A maximum of two Pentium II or Pentium III CPUs can be used in a dual slot motherboard. The Celeron does not have official SMP support.
There are also converter cards, known as Slotkets, which hold a Socket 8 so that a Pentium Pro CPU can be used with Slot 1 motherboards.[3] These specific converters, however, are rare. Another kind of slotket allows using a Socket 370 CPU in a Slot 1. Many of these latter devices are equipped with own voltage regulator modules, in order to supply the new CPU with a lower core voltage, which the motherboard would not otherwise allow.
Form factors[edit]
Intel Pentium II CPU in SECC form factor
Pentium III (Katmai) in SECC2: CPU at center, two chips at right are cache
Celeron in SEPP: CPU at center (under heat spreader), surrounding chips are resistors and bypass capacitors
Slot 1 To Socket 370
The Single Edge Contact Cartridge, or 'SECC', was used at the beginning of the Slot 1-era for Pentium II CPUs. Inside the cartridge, the CPU itself is enclosed in a hybrid plastic and metal case. The back of the housing is plastic and has several markings on it: the name, 'Pentium II'; the Intel logo; a hologram; and the model number. The front consists of a black anodized aluminum plate, which is used to hold the CPU cooler. The SECC form is very solid, because the CPU itself is resting safely inside the case. As compared to socket-based CPUs, there are no pins that can be bent, and the CPU is less likely to be damaged by improper installation of a cooler.
Following SECC, the SEPP-form (Single Edge Processor Package) appeared on the market. It was designed for lower-priced Celeron CPUs. This form lacks a case entirely, consisting solely of the printed-circuit board holding the components.
A form factor called SECC2 was used for late Pentium II and Pentium III CPUs for Slot 1, which was created to accommodate the switch to flip chip packaging.[4] Only the front plate was carried over, the coolers were now mounted straight to the PCB and exposed CPU die and are, as such, incompatible with SECC cartridges.
History[edit]
Historically, there are three platforms for the Intel P6-CPUs: Socket 8, Slot 1 and Socket 370.
Slot 1 is a successor to Socket 8. While the Socket 8 CPUs (Pentium Pro) directly had the L2-cache embedded into the CPU, it is located (outside of the core) on a circuit board shared with the core itself. The exception is later Slot 1 CPUs with the Coppermine core which have the L2-Cache embedded into the die.
In the beginning of 2000, while the Pentium-III-CPUs with FC-PGA-housing appeared, Slot 1 was slowly succeeded by Socket 370, after Intel had already offered Socket 370 and Slot 1 at the same time since the beginning of 1999. Socket 370 was initially made for the low-cost Celeron processors, while Slot 1 was thought of as a platform for the expensive Pentium II and early Pentium III models. Cache and core were both embedded into the die.
Slot 1 also obsoleted the old Socket 7, at least regarding Intel, as the standard platform for the home-user. After superseding the Intel P5Pentium MMX CPU, Intel completely left the Socket 7 market.
Slot 1 To Socket 370 Adapter
Chipsets and officially supported CPUs[5][6][edit]
![Slot Slot](https://cdn.shopify.com/s/files/1/1973/1291/products/MADI-Slot-Socket-SS-1-Internet-11-2018_2048x.png?v=1548778318)
Slot 1/Socket 370 Converter
Slot 1/Socket 8 Converter
Slot 1 To Socket 8 Days
Intel 440FX [7][edit]
- Introduced in: May 6, 1996
- FSB: 66 MHz
- PIO/WDMA
- Supported RAM type: EDO-DRAM
- Supported CPUs:
- Pentium II with 66 MHz FSB
- Celeron (Covington, Mendocino)
- Used in both Socket 8 (Pentium Pro) and Slot 1 (Pentium II, early Celerons)
- Does not support AGP or SDRAM
- Allowed up to two CPUs for SMP
Intel 440LX [8][edit]
- Introduced in: August 27, 1997
- FSB: 66 MHz
- Supported RAM type: EDO-DRAM, SDRAM
- Supported CPUs: Pentium II, Celeron
- AGP 2× Mode
- UDMA/33
- Pentium II with 66 MHz FSB
- Celeron (Covington, Mendocino)
- Introduced support for AGP and SDRAM
- Allowed up to two CPUs for SMP
Intel 440EX [9][edit]
- Introduced in: April, 1998
- FSB: 66 MHz
- Supported RAM type: EDO-DRAM, SDRAM
- Supported CPUs: Pentium II, Celeron
- AGP 2× Mode
- UDMA/33
- Pentium II with 66 MHz FSB
- Celeron (Covington, Mendocino)
- Same specifications as 440LX, but memory support limited to 256MB and no SMP support.
Intel 440BX [10][edit]
- Introduced in: April 1998
- FSB: 66 and 100 MHz (some motherboards supported overclocking to 133 MHz, allowing usage of Socket 370 CPUs using a Slocket)
- AGP 2× Mode (max memory mapping 32 or 64 MB)
- UDMA/33
- Supported RAM types: SDRAM (PC66 and PC100, PC133 with overclocking) up to 4 DIMMs of 256 MB
- Supported CPUs:
- Pentium II with 66 and 100 MHz FSB
- Pentium III with 100 MHz FSB (133 with overclocking)
- Celeron (Covington, Mendocino, Coppermine)
- Allowed up to two CPUs for SMP
Intel 440ZX[edit]
- Introduced in: November 1998
- FSB: 66 and 100 MHz (some motherboards supported overclocking to 133 MHz, allowing usage of Socket 370 CPUs using a Slocket)
- AGP 2× Mode
- UDMA/33
- Supported RAM types: SDRAM (PC66 and PC100, PC133 with overclocking)
- Supported CPUs:
- Pentium II with 66 and 100 MHz FSB
- Pentium III with 100 MHz FSB (133 with overclocking)
- Celeron (Covington, Mendocino, Coppermine)
Intel 820/820E (Camino)[edit]
- Introduced in: November 1999
- FSB: 66, 100, and 133 MHz
- AGP 4× Mode
- UDMA/66 (i820), UDMA/100 (i820E)
- Supported RAM types: RDRAM, SDRAM (PC133)
- Supported CPUs: All Slot 1 CPUs
- Allowed up to two CPUs for SMP
Via Apollo Pro / Pro+[edit]
- Introduced in: May 1998 (Pro Plus: Dec 1998)
- FSB: 66, 100 MHz (some motherboards supported overclocking to 133 MHz, allowing usage of Socket 370 CPUs using a Slocket)
- AGP 2× Mode
- UDMA/33 (VT82C586B/VT82C596A), UDMA/66 (VT82C596B)
- Supported CPUs:
- Pentium Pro with 66 MHz FSB
- Pentium II with 66 and 100 MHz FSB
- Pentium III with 100 MHz FSB (133 with overclocking)
- Celeron (Covington, Mendocino, Coppermine)
Via Apollo Pro 133[edit]
- Introduced in: July 1999
- FSB: 66, 100, and 133 MHz
- AGP 2× Mode
- UDMA/33 (VT82C596A), UDMA/66 (VT82C596B/VT82C686A), UDMA/100 (VT82C686B)
- Supported CPUs: All Slot 1 CPUs
Via Apollo Pro 133A[edit]
- Introduced in: Oct 1999
- FSB: 66, 100, and 133 MHz
- AGP 4× Mode
- UDMA/66 (VT82C596B/VT82C686A), UDMA/100 (VT82C686B)
- Supported CPUs: All Slot 1 CPUs
- Allowed up to two CPUs for SMP
See also[edit]
References[edit]
- ^'CPU Sockets Chart'. erols.com. Retrieved 2009-03-31.
- ^Pentium_Pro#An_innovation_in_cache
- ^Experience of Pentium Pro on Slot 1 motherboard usage
- ^http://www.tomshardware.com/reviews/overclocking-special,94-2.html
- ^List of Intel chipsets
- ^List of VIA chipsets
- ^Intel Corporation: 440FX PCIset Datasheet
- ^Intel Corporation: 440LX AGPset Design Guide[permanent dead link]
- ^Intel Corporation: 440EX AGPset Design Guide
- ^Intel Corporation: 440BX AGPset Design GuideArchived 2012-10-04 at the Wayback Machine
External links[edit]
Wikimedia Commons has media related to Slot 1. |
- Intel's specifications for the SC242 connectors[permanent dead link]
Retrieved from 'https://en.wikipedia.org/w/index.php?title=Slot_1&oldid=932947753'